Free phone: 1 - 888 - 345 - 6789
Delivery from $50.00 and easy return
0
There are 0 item(s) in your cart
Subtotal: $0.00
0
There are 0 item(s) in your cart
Subtotal: $0.00

ARB LOCKER PROMOTION

$1,200.00

Product by: Toyota Tacoma

SHARE:

Category

Description

Air locker locking differentials allow you to tackle the toughest terrain. The world’s premier traction aid, ARB air lockers keep you moving in all conditions.

Option 1 – For Customers Purchasing a single Air Locker
1. Buy one (1) Air Locker and receive 50% off a single on-board compressor (#CKMA12)
OR
2. Buy one (1) Air Locker and receive 25% off a twin on-board compressor (#CKMTA12)
Option 2 – For customers purchasing two Air Lockers
1. Buy two (2) Air Lockers and receive a FREE single on-board compressor (#CKMA12)
OR
2. Buy two (2) Air Lockers and receive 50% off a twin on-board compressor (#CKMTA12)

FRONT AIR LOCKERS SPECS:

RD90

Fits 1995-2004 7.5″ Front (All Gear Ratios)

  • For Use With 30 Spline Axles
  • For Use With 3.73 And Down Gears
  • Air Activated Selectable Locker
  • Converts From Open Differential To fully Locked Or Spool
  • Simple Push Button Operation
  • ARB 4×4 Accessories
  • Popular Axle Manufacture: Toyota
  • Axle Location: Front
  • Axle Type: Toyota 7.5″ IFS
  • Shaft: 1.10″
  • Fitment: Universal Fit
  • Axle Spline: 27 Splines
  • Ratio: All
  • Differential Type: Selectable Locker

 

RD121

Fits 2016 and Up Tacoma 8″ Front (3.73 Gear Ratio and Down, all aftermarket gear sets)

  • For Use With 30 Spline Axles
  • For Use With 3.73 And Down Gears
  • Air Activated Selectable Locker
  • Converts From Open Differential To fully Locked Or Spool
  • Simple Push Button Operation
  • ARB 4×4 Accessories
  • Popular Axle Manufacture: Toyota
  • Axle Location: Front
  • Axle Type: Toyota Tacoma
  • Fitment: Universal Fit
  • Axle Spline: 30 Splines
  • Differential Type: Selectable Locker

 

RD111

Fits 2005 and up Tacoma 8″ IFS front (3.91 and up)

  • For Use With 30 Spline Axles
  • For Use With 3.91 And Up Gears
  • Air Activated Selectable Locker
  • Converts From Open Differential To fully Locked Or Spool
  • Simple Push-Button Operation
  • Popular Axle Manufacture: Toyota
  • Axle Location: Front
  • Axle Type: Toyota Tacoma|Toyota 8 Inch
  • Fitment: Universal Fit
  • Axle Spline: 30 Splines
  • Differential Type: Selectable Locker

 

REAR AIR LOCKERS SPECS:

RD129

Fits 2016 and Up Fits 1995 to 2015 Tacoma Rear Differential (Models not equipped with factory locker)

  • For Use With 30 Spline Axles
  • For Use With 50 mm Carrier Bearing
  • Air Activated Selectable Locker
  • Converts From Open Differential To fully Locked Or Spool
  • Simple Push Button Operation
  • Popular Axle Manufacture: Toyota
  • Axle Location: Rear
  • Axle Type: Toyota 8.4 Inches
  • Fitment: Universal Fit
  • Shaft: 1.31 in
  • Spline: 30
  • Ratio: All
  • Axle Spline: 30 Splines
  • Differential Type: Selectable Locker

 

RD132

Fits 2016 and Up Tacoma Rear with 8″ Ring Gear (Models not equipped with factory locker)

  • For Use With 30 Spline Axles
  • For Use With 50 mm Carrier Bearing
  • Air Activated Selectable Locker
  • Converts From Open Differential To fully Locked Or Spool
  • Simple Push Button Operation
  • ARB 4×4 Accessories
  • Popular Axle Manufacture: Toyota
  • Axle Location: Front| Rear
  • Axle Type: Toyota 8 Inches
  • Fitment: Universal Fit
  • Axle Spline: 30 Splines
  • Differential Type: Selectable Locker

 

Fits 2016 and UP Tacoma Rear with 8.9″ Ring Gear (All Manual Transmissions and factory locker equipped trucks)

  • ARB 4×4 Accessories
  • Popular Axle Manufacture: Toyota
  • Axle Location: Front
  • Axle Type: Toyota 8.9 Inches
  • Fitment: Universal Fit
  • Axle Spline: 32 Splines
  • Differential Type: Selectable Locker

ARB TWIN AIR COMPRESSOR KIT 12 VOLT – CKMTA12

ARB’s new CKMTA12 twin on-board compressor kits were designed to fill the market need for a compact sized yet high-volume compressed air source to suit the high volume airflow needs of most air powered tools, and also to suit the actuation and control needs of the ARB Air Locker, and the harsh and demanding environment of the ARB Air Locker user.

Activate your ARB Air Locking Differentials, air up a 35″ tire in less than a minute and run air tools. This 100% duty cycle, 6.16 CFM compressor is built to support all of your compressed air needs.

Pneumatic supply and electrical control for ARB Air Locker(s). Air Locker Manifold Kit #171503 required. CLICK HERE

 

  • Designed for inflating Tires and air locker activation when used in conjunction with optional accessories
  • Suitable for many air tools when used in conjunction with a 4L air tank (optional with on-board models)
  • 100% duty cycle
  • Sealed for moisture and dust resistance
  • Hard anodized cylinder bores for reduced friction
  • Teflon impregnated carbon fiber piston seals for maximum trouble free life
  • anodized mounting bracket dissipates heat
  • Integrated pressure switch, relays and IP55 (waterproof/dustproof) brushless fan cools electronics, motors and cylinder heads
  • Over-pressure safety valve equipped
  • On-board model available in either a 12V or 24V configuration

 

ARB SINGLE HEAVY-DUTY AIR COMPRESSOR FOR ARB AIR LOCKERS

Permanently mounted, this compressor is installed into your truck and includes a full wiring loom with air locker solenoid plug-in contacts, mounting hardware with reinforcing bracket, and a quality compressor isolating switch. This compressor, with the addition of the ARB Pump-Up Kit (part #171302) can be used to activate air lockers and can perform other functions such as inflating camping gear.

So what makes this compressor special? It’s small enough to fit into even the tightest space and quiet enough to mount in the cab. It has enough output to air up four 35″ – 37″ tires in a single duty cycle and typically airs up a 35″ tire in just over two minutes. And, it works. We’ve tested this unit in ovens, freezers, underwater, and in the silty dust of the Simpson Desert and it continues to perform.

  • Sealed for moisture and dust resistance
  • Hard-anodized cylinder bore for reduced friction
  • Teflon-impregnated carbon fiber piston seal for maximum trouble-free life
  • Anodized mounting bracket dissipates motor heat and allows compressor to be repositioned 180 degrees on vehicle mounted models
  • Quality components for quiet operation and extra long life
  • Constructed entirely of lightweight, high strength engineering grade materials
  • Over-pressure safety valve equipped
  • Motor is internally thermal protected against extreme temperature damage
  • Heavy duty maxi-fuse equipped for professional in-line circuit protection
  • On-board model available in either a 12V or 24V configuration

8 reviews for ARB LOCKER PROMOTION

  1. Samuel (verified owner)

    The product is firmly packed.

    1 product
  2. Nathaniel (verified owner)

    Very well worth the money.

    1 product
  3. Charles (verified owner)

    Very fast delivery.

    1 product
  4. Nolan (verified owner)

    Very fast delivery.

    1 product
  5. Phoenix (verified owner)

    Good service.

    1 product
  6. Kaden Arabic (verified owner)

    Very fast delivery.

    1 product
  7. Aiden (verified owner)

    The product is firmly packed.

    1 product
  8. Liam (verified owner)

    Very well worth the money.

    1 product
Add a review

Your email address will not be published. Required fields are marked *

Good quality.The product is firmly packed.Good service.Very well worth the money.Very fast delivery.

x